Showing posts with label yeast. Show all posts
Showing posts with label yeast. Show all posts

Sunday, March 20, 2016

Brewing beer: attempt #4

This is my fourth attempt at brewing beer and my second run at the Blonde Ale. This time I have 8 pounds of liquid malt extract (LME). If you recall, my last attempt was 6.6 pounds and the recipe calls for 8.3 pounds. Apparently, it's not possible to buy the correct amount but 8 is certainly sufficient. 
In steeping the grains, I didn't wait until the proper steeping temperature. I waited until the temp was correct and then steeped it for 20 minutes. No harm, no fowl. 
After steeping the grains, I let the liquid drip out until I was tired of it dripping slowly. 
This stuff is super goopy, kind of like syrup. It smells good! 
Here I am, waiting on the wort to come to a rolling boil. Then my sister called and I couldn't take any more photos. We talked nearly the entire boil, which is 60 minutes long. I through the Willamette hops in at the beginning of the boil and all of the LME.
About 20 minutes before the boil was over, I installed the wort chiller into the kettle. There was so much condensation that came out of it! I don't remember it doing that the last time but it was brand new the last time.
I accidentally turned the garden hose on too high and the seal on the wort chiller appeared to be breached somewhat. Oops. 
Here's the yeast! I lost a little to the ground when I opened up the package. 
As you can see, the yeast is evenly dispersed across the top of the wort (I'm actually not sure if this is considered beer at this point or not.) In approximately two weeks, I will be moving the beer to a secondary fermenter to help clarify it. At that point, I will also introduce pumpkin and pumpkin pie spice. Cheers!

Sunday, September 20, 2015

Brew day English Brown Ale

Here's all the ingredients to make beer. I just need to add water. I used tap water. Next time, I might buy bottled water. 
Here's the dry malt extracts. 
This sock full of malts is soaked in water for about twenty minutes. Once that's done, the liquid is called wort. 
The beginning of the steeping. Let the water turn to wort!
Selfie with the malt sock. I had to hold it while it drained and that took forever!
Next, I started the boiling portion which toon a total of 60 minutes to complete. 
Dry malt extract is added to the boiling water. 
Liquid malt extract is added next and then the wort is brought back to a rolling boil. 
Three different hops were used for this beer. After the book was over, I had to chill the wort as quickly as possible. This time I used ice in the tub with water. It was faster this time. I think my thermometer died. It got stuck on 80 degrees. I needed to bring the wort to 70. After I decided it was stuck, I transferred the wort to the fermenter. (I didn't lift the 2.5 gallons, my muscle di,d aka husband.)
Here is the beer before I pitched the yeast. 
Here is the yeast. 
Here is the yeast on top of the wort (is it still called wort at this point, because I'm not totally sure.)
Here is the air lock. Over the next 4 to 6 days, I will be monitoring the fermentation process and logging it on my blog. The goal is to bottle on Sunday. The instructions indicated that I need to wait 48 hours after the yeast is finished.
After all that, I got a beer at TapWerks. Now I'm pooped. 

Sunday, May 24, 2015

Brewing beer

For the first time, in my life, I brewed beer. I won't know the level of success until after the bottling and conditioning of the bottle. That's for another post. 
I had to boil 2.5 gallons of water and then I poured in the liquid malt extract. This is an extract kit and it's supposed to be easy. 
The extract was so syrupy and sticky. I wasn't ready for that. I let the paddle melt a bit in the wort. Then I switched to a metal paddle without sanitizing if it first. Then I dumped all my sanitizer before I had a chance to resanitizise my paddle. 
Things that I worry about include: did I wash my hands enough and did I sanitize enough. I don't know and I won't know the success of this experiment until after the bottles have been conditioned. 
This will require patience but I hope the wait is worth it. This kit is from Brewers Best and the instructions were easy to follow. For now, you can call me Brewmaster. 

Monday, April 20, 2015

Beer will be brewed


I've been going through my equipment, taking stock of what I have and what I need. 


This is the all important kettle for boiling the water and wort. Wort is hops and water combined. All of this learning about brewing beer has me so excited!


These are the food grade buckets. One will act as a fermenter and the other will be used on bottling day. There's a lid for the fermenter. Fermentation will take about a week.



The important ingredients include the malt extract (I've learned that what I bought was an extract kit and it must get this name from the malt extract). The hops come next and the final step will be to pitch the yeast. I hope the yeast is hungry and eats all the yummy hops I'll be providing. The instructions say this is an easy kit. I hope so. I'll brew by myself and maybe bottle by myself. Things I'm missing:thermometer and hydrometer. I'm also trying to figure out how to use my sanitizer. I have a powder that needs to be mixed with hot water.


Future posts include, TV, Picasso Cafe veggie dinner and Sandals reunion week. I have so many photos to get to from Antigua! In other news, Prickly Pete has come to live on our front porch. We let the winter kill the last cactus. Why not try again?